|Buy Survival Gear Free Survival Guide Disaster News Human Survival Contact|
Can mold cause health problems?
Molds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing. Molds have the potential to cause health problems. Molds produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Allergic responses include hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis). Allergic reactions to mold are common. They can be immediate or delayed. Molds can also cause asthma attacks in people with asthma who are allergic to mold. In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold- 2
■ The key to mold
control is moisture control.
How do I get rid of mold?
It is impossible to get rid of all mold and mold spores indoors; some mold spores will be found floating through the air and in house dust. The mold spores will not grow if moisture is not present. Indoor mold growth can and should be prevented or controlled by controlling moisture indoors. If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don’t fix the water problem, then, most likely, the mold problem will come back. Magnified mold spores. Molds can gradually destroy the things they grow on. You can prevent damage to your home and furnishings, save money, and avoid potential health problems by controlling moisture and eliminating mold growth.
Who should do the cleanup?
Who should do the cleanup
depends on a number of factors. One consideration is the
size of the mold problem. If the moldy area is less than
about 10 square feet (less than roughly a 3 ft. by 3 ft. patch),
in most cases, you can handle the job yourself, following the
■ If you choose to hire a contractor (or other professional service provider) to do the cleanup, make sure the contractor has experience cleaning up mold. Check references and ask the contractor to follow the recommendations in EPA’s Mold Remediation in Schools and Commercial Buildings, the guidelines of the American Conference of Governmental Industrial Hygenists (ACGIH), or other guidelines from professional or government organizations.
■ If you suspect that the heating/ventilation/air conditioning (HVAC) system may be contaminated with mold (it is part of an identified moisture problem, for instance, or there is mold near the intake to the system), consult EPA’s guide Should You Have the Air Ducts in Your Home Cleaned? before taking further action. Do not run the HVAC system if you know or suspect that it is contaminated with mold - it could spread mold throughout the building. Visit www.epa.gov/iaq/pubs/ airduct.html .
■ If the water and/or mold damage was caused by sewage or other contaminated water, then call in a professional who has experience cleaning and fixing buildings damaged by contaminated water.
■ If you have health concerns, consult a health professional before starting cleanup.
Mold Cleaning Tips and techniques
The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic damage. It may not be possible to clean an item so that its original appearance is restored.
■ Fix plumbing leaks and other water problems as soon as possible. Dry all items completely.
■ Scrub mold off hard surfaces with detergent and water, and dry completely. Places that are often or always damp can be hard to maintain completely free of mold. If there’s some mold in the shower or elsewhere in the bathroom that seems to reappear, increasing the ventilation (running a fan or opening a window) and cleaning more frequently will usually prevent mold from recurring, or at least keep the mold to a minimum. Bathroom Tip MOLD CLEANUP GUIDELINES Mold growing on the underside of a plastic lawnchair in an area where rainwater drips through and deposits organic material.
■ Absorbent or porous materials, such as ceiling tiles and
carpet, may have to be thrown away if they become
moldy. Mold can grow on or fill in the empty spaces and
crevices of porous materials, so the mold may be
difficult or impossible to remove completely.
■ Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel.
■ If you are unsure about how to clean an item, or if the item is expensive or of sentimental value, you may wish to consult a specialist. Specialists in furniture repair, restoration, painting, art restoration and conservation, carpet and rug cleaning, water damage, and fire or water restoration are commonly listed in phone books. Be sure to ask for and check references. Look for specialists who are affiliated with professional organizations.
■ Avoid breathing
in mold or mold spores. In order to limit your exposure to
airborne mold, you may want to wear an N-95 respirator,
available at many hardware stores and from companies that
advertise on the Internet. (They cost about $12 to $25.) Some
N-95 respirators resemble a paper dust mask with a nozzle on the
front, others are made primarily of plastic or rubber and have
removable cartridges that trap most of the mold spores from
entering. In order to be effective, the respirator or mask must
fit properly, so carefully follow the instructions supplied with
WHAT TO WEAR WHEN CLEANING MOLDY AREAS
Mold growing on a suitcase stored in a humid basement. It is important to take precautions to LIMIT YOUR EXPOSURE to mold and mold spores.
How do I know when the remediation or cleanup is finished?
You must have completely fixed the water or moisture problem before the cleanup or remediation can be considered finished.
■ You should have completed mold removal. Visible mold and moldy odors should not be present. Please note that mold may cause staining and cosmetic damage.
■ You should have revisited the site(s) shortly after cleanup and it should show no signs of water damage or mold growth.
■ People should have been able to occupy or re-occupy the area without health complaints or physical symptoms.
■ Ultimately, this is a judgment call; there is no easy answer. If you have concerns or questions call the EPA Indoor Air Quality Information Clearinghouse at (800) 438-4318.
■ Wear gloves. Long gloves that extend to the middle of the forearm are recommended. When working with water and a mild detergent, ordinary household rubber gloves may be used. If you are using a disinfectant, a biocide such as chlorine bleach, or a strong cleaning solution, you should select gloves made from natural rubber, neoprene, nitrile, polyurethane, or PVC (see Cleanup and Biocides). Avoid touching mold or moldy items with your bare hands.
■ Wear goggles. Goggles that do not have ventilation holes are recommended. Avoid getting mold or mold spores in your eyes. Cleaning while wearing N-95 respirator, gloves, and goggles. 10
■ When water leaks or spills occur indoors - ACT QUICKLY. If wet or damp materials or areas are dried 24-48 hours after a leak or spill happens, in most cases mold will not grow.
■ Clean and repair roof gutters regularly.
■ Make sure the ground slopes away from the building foundation, so that water does not enter or collect around the foundation.
■ Keep air conditioning drip pans clean and the drain lines unobstructed and flowing properly.
MOISTURE AND MOLD PREVENTION AND CONTROL TIPS
Moisture Control is
the Key to Mold Control
Actions that will help prevent condensation: Reduce the humidity. Increase ventilation or air movement by opening doors and/or windows, when practical. Use fans as needed. Cover cold surfaces, such as cold water pipes, with insulation. Increase air temperature. Renters: Report all plumbing leaks and moisture problems immediately to your building owner, manager, or superintendent. In cases where persistent water problems are not addressed, you may want to contact local, state, or federal health or housing authorities.
Testing or sampling for mold
Is sampling for mold needed? In most cases, if visible mold growth is present, sampling is unnecessary. Since no EPA or other federal limits have been set for mold or mold spores, sampling cannot be used to check a building’s compliance with federal mold standards. Surface sampling may be useful to determine if an area has been adequately cleaned or remediated. Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods, and interpreting results. Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association (AIHA), the American Conference of Governmental Industrial Hygienists (ACGIH), or other professional organizations.
Suspicion of hidden mold
You may suspect hidden mold if a building smells moldy, but you cannot see the source, or if you know there has been water damage and residents are reporting health problems. Mold may be hidden in places such as the back side of dry wall, wallpaper, or paneling, the top side of ceiling tiles, the underside of carpets and pads, etc. Other possible locations of hidden mold include areas inside walls around pipes (with leaking or condensing pipes), the surface of walls behind furniture (where condensation forms), inside ductwork, and in roof materials above ceiling tiles (due to roof leaks or insufficient insulation). Investigating hidden mold problems Investigating hidden mold problems may be difficult and will require caution when the investigation involves disturbing potential sites of mold growth. For example, removal of wallpaper can lead to a massive release of spores if there is mold growing on the underside of the paper. If you believe that you may have a hidden mold problem, consider hiring an experienced professional.
Cleanup and Biocides
Biocides are substances that can destroy living organisms. The use of a chemical or biocide that kills organisms such as mold (chlorine bleach, for example) is not recommended as a routine practice during mold cleanup. There may be instances, however, when professional judgment may indicate its use (for example, when immune-compromised individuals are present). In most cases, it is not possible or desirable to sterilize an area; a background level of mold spores will remain - these spores will not grow if the moisture problem has been resolved. If you choose to use disinfectants or biocides, always ventilate the area and exhaust the air to the outdoors. Never mix chlorine bleach solution with other cleaning solutions or detergents that contain ammonia because toxic fumes could be produced. Please note: Dead mold may still cause allergic reactions in some people, so it is not enough to simply kill the mold, it must also be removed.
Information Courtesy of the hard working men and women at the EPA
Webmasters: We invite you to link to this site in accordance with our